Description
EtherSW 0701Fi-EA is a cost-effect high performance 8-port 10/100 Mbps Ethernet/Fast Ethernet management switch with Broadcom solution. There are eight RJ-45 connectors and one 100-FX connector for the switch - with Port 1 of the switch could be TX or FX port depending on which port is link-up. So this switch could have 8*TX or 7*TX+1*FX active ports, and the TX/FX function of Port 1 is auto-detected. This switch supports remote management function by SNMP, Http and Telnet operations. EtherSW 0701Fi-EA supports lots of functions for a L2 switch management, e.g. 802.1Q VLAN, 802.1x Port Security, Rate Control, Port Configuration, Port Mirroring, Port Statistics, QoS functions. Auto-MDIX function is also supported for every TX port of the switch for easy cable connection.
Features
	8* RJ45 ports, with 10/100Mbps, Full/Half duplex auto-negotiation and Auto-MDIX function
	1* FX port with 100Mbps/Full duplex function sharing with one TX port for Port 1
	Support out-band console and in-band SNMP/Http/Telnet management interface
	Prevents packet loss with back pressure and IEEE802.3x flow control functions
	4 priority queues are supported on each port for QoS application
	Support 802.1Q VLAN
	Support Static Mac Address access limit on port
	Support IEEE 802.1x Port Security function
	Support Rate Control on port
	Support IP Multicast with IGMP snooping function
	Low Power consumption, no fan inside
	Support remote port configuration setting and status monitoring